To Next PageTo Next PageWhat to do if Klimaire KSIA009-H216-I doesn't work but the LED is on?
If your Klimaire Air Conditioner's LED display is on but the unit isn't working, check the TIMER setting. If the TIMER is set, the air-conditioner will be in a hold condition. Cancel the TIMER setting to return the air-conditioner to normal operation.
How to fix Klimaire KSIA009-H216-I when the motor runs but it doesn't work?
If you hear the motor running in your Klimaire Air Conditioner but it's not working, ensure the unit is powered on. Press the ON/OFF button on the remote control, making sure the signal is well received by the unit. This should bring it to a working condition.
What causes my Klimaire KSIA009-H216-I Air Conditioner compressor to work discontinuously and the fan to slow down?
The compressor in your Klimaire Air Conditioner might stop intermittently, and the fan motor might slow down in cooling and dehumidifying modes to prevent the indoor heat exchanger from freezing.
Why does Klimaire Air Conditioner compressor work discontinuously in dehumidifying mode?
When your Klimaire Air Conditioner is in dehumidifying mode, the unit will automatically control the compressor's operation based on the inside temperature.
General| Cooling Capacity | 9, 000 BTU/h |
|---|---|
| Seasonal Energy Efficiency Ratio (SEER) | 16 |
| Refrigerant | R410A |
| Weight (Outdoor Unit) | 66.1 lbs |
| Noise Level (Outdoor) | 52 dB(A) |
| Power Supply | 1 Phase, 60 Hz |
| Heating Capacity | 9, 000 BTU/h |
| Voltage | 208-230 V |
| Operating Temperature (Cooling) | 62°F - 90°F |
| Air Flow (Indoor) | 350 CFM |
Lists error codes and their corresponding problems for the air conditioner.
Key initial checks for air conditioner operation, including voltage and connections.
Step-by-step procedure to diagnose and resolve no power display issues.
Procedure to diagnose and fix problems with the indoor fan motor not working.
Steps to troubleshoot and resolve issues with the outdoor unit not functioning.
Procedure for diagnosing and fixing issues with the step motor operation.
Procedure for diagnosing and resolving remote control malfunctions.
