This document serves as an owner's manual for Klipsch Synergy Black Label speakers, providing essential information for setup, connection, and maintenance. The manual emphasizes safety, optimal placement, and proper connection to ensure the longevity and performance of the speakers.
Function Description
Klipsch Synergy Black Label speakers are designed to deliver high-quality audio for various home entertainment setups, including stereo and surround sound systems. The product line includes bookshelf speakers, center channel speakers, and surround sound speakers, each tailored for specific roles within an audio system.
- Bookshelf Speakers: These are versatile speakers suitable for stereo listening or as front left/right channels in a home theater system. They are designed to be placed on shelves, stands, or mounted, offering flexibility in room integration.
- Center Channel Speakers: Specifically engineered to reproduce dialogue and primary on-screen sounds, these speakers ensure that audio appears to originate directly from the video display. They are crucial for clear and intelligible speech in movies and TV shows.
- Rear Surround Channel Speakers (WDST™): These speakers are designed to create an immersive surround sound experience by reproducing ambient and spatial effects. They contribute to the sense of depth and realism in multi-channel audio setups.
The speakers are engineered for high efficiency and 8-ohm compatibility, allowing them to work effectively with a wide range of amplifiers while maintaining low distortion even at high output levels.
Usage Features
The manual provides detailed instructions for setting up and using the Klipsch Synergy Black Label speakers, focusing on optimal performance and user safety.
Room Placement
- Left and Right Main Channel Speakers: For optimal stereo imaging and performance, these speakers should be placed six to 15 feet (2 to 4.5m) apart and at least 24 inches (60.8cm) from back and side walls. To enhance stereo imaging, they can be toed-in slightly towards the listening position. The ideal listening distance is approximately 1 to 1.5 times the distance separating the speakers.
- Center Channel Speakers: These speakers should be positioned as close as possible to the video screen, ideally directly above or below it, to ensure that dialogue and on-screen sounds are accurately localized.
- Rear Surround Channel Speakers: Klipsch WDST™ surround speakers are recommended to be placed approximately two feet above the listening position, typically 5-7 feet above the floor. They should be positioned on the walls directly adjacent to or behind the listening position. The exact placement may vary depending on the room's characteristics to best recreate the sense of space and ambience intended by surround sound technologies.
Connecting
- Conventional Connection: The manual outlines a standard wiring procedure using 16-gauge or larger speaker wire. Users should connect the RED "positive" (+) terminal of each speaker to the RED "positive" (+) terminal of the corresponding amplifier channel, and the BLACK "negative" (-) terminal of each speaker to the BLACK "negative" (-) terminal of the amplifier channel. It is crucial to ensure that no bare wires touch other terminals to prevent short circuits and equipment damage.
- Dual Binding Posts: Some Synergy speakers feature dual binding posts connected by a metal strip. This strip should not be removed as it is essential for correct speaker function. Speaker wire should be connected to the top set of binding posts. The manual also briefly mentions "Bi-wiring" as an option for speakers with two sets of binding posts, advising users to consult their receiver's manual for detailed instructions.
- Amplifier Requirements: Klipsch speakers are highly efficient and compatible with most amplifiers. While they can achieve high output levels with low distortion, users are cautioned to exercise care with the volume control to prevent permanent hearing damage and potential damage to the speakers or amplifier from overdriving. Consulting with a dealer is recommended to ensure the amplifier is best suited for the application.
Installation of Accessories
- Some Klipsch speakers may require the installation of feet or other accessories prior to use. The manual refers to diagrams for specific installation instructions, such as placing domed rubber feet on bookshelf and surround speakers, and using an adjustable post for center channel speakers.
- For wall-mounting surround speakers, the manual provides guidance on using a mounting template and appropriate screws (#10 or #12, 2.5" - 3" panhead wood screws) to secure the speakers to wall studs or anchors, leaving about 1/4" exposed. A specific caution is given against using the keyhole for ceiling mounting.
Maintenance Features
The manual provides straightforward advice for maintaining the Klipsch Synergy Black Label speakers to ensure their longevity and appearance.
- Cleaning: The primary maintenance task is occasional dusting. Users are advised against using abrasive or solvent-based cleaners, or any harsh detergents, as these can damage the speaker finishes. Grilles can be cleaned using a vacuum cleaner with a brush attachment.
- Safety Instructions: The manual includes a comprehensive list of important safety instructions, emphasizing the need to read and follow all warnings and instructions. Key safety points include:
- Avoiding proximity to water.
- Cleaning only with a dry cloth.
- Ensuring proper ventilation and avoiding installation near heat sources.
- Using only manufacturer-specified attachments and accessories.
- Exercising caution when moving equipment on a cart to prevent tip-over.
- Protecting the apparatus from dripping or splashing liquids.
- Warning against exposure to rain or moisture to reduce the risk of fire or electrical shock.
- Prohibiting the placement of naked flame sources, such as candles, on the product.
- A "CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN." warning indicates that there are no user-serviceable parts inside and all servicing should be referred to qualified service personnel.
Product Registration
Users are encouraged to register their product online at www.klipsch.com/register. This registration helps Klipsch keep customers informed about new products and promotions, ensures personal information is not resold, and is not used for warranty purposes (users should retain their receipt for warranty claims).
The speakers are eligible to bear the CE mark, conforming to European Union EMC Directive 2004/108/EC. A WEEE (Waste Electrical and Electronic Equipment) notice indicates that the product should not be disposed of with household waste in EU and Norway, but rather deposited at an appropriate facility for recovery and recycling.
Need help?
General
To Next Page