Do you have a question about the Klipsch KHO-7 and is the answer not in the manual?
Product color | White |
---|---|
Housing material | ABS synthetics |
Recommended usage | Universal |
Suitable for outdoor use | Yes |
Speaker type | - |
Speaker enclosure | Reflex |
Speaker placement | In-wall/in-ceiling |
Audio output channels | - channels |
Woofer diameter (imperial) | 5.25 \ |
Tweeter diameter (imperial) | 1 \ |
Impedance | 8 Ω |
Sensitivity | 92 dB |
Frequency range | 65 - 20000 Hz |
RMS rated power | 75 W |
Crossover frequency | 2800 Hz |
Peak Music Power Output (PMPO) | 300 W |
Depth | 210 mm |
---|---|
Width | 311 mm |
Height | 172 mm |
Weight | 2700 g |
Klipsch KHO-7 is suitable for patios, decks, pools, and porches where elements make conventional speakers unusable.
Mount speakers above ear level, facing the listening area, spaced 6-15 feet apart for optimal stereo imaging.
Placing speakers in corners or near walls enhances bass due to additional reflected energy.
Included 'C'-style brackets offer placement flexibility and weather-resistant mounting.
Use bracket as template, drill pilot holes into studs, and affix speaker with supplied knobs.
Use drywall or masonry anchors if wall studs are unavailable, consulting professionals if needed.
Use the vinyl port plug for installations in extremely wet conditions to prevent water entry.
Gently insert plug into port; it slightly reduces bass but improves weather resistance.
Switch electronics OFF, connect KHO-7 to amplifier's 'Front' or 'Main' channels observing polarity.
Observe Red (+) and Black (-) color coding for proper speaker wire connections to maintain bass and stereo image.
Avoid excess bare wire to prevent shorts. High-quality cables can improve sound.
Lightly sand surfaces with 300-400 grit sandpaper and clean with mild detergent before painting.
Mask speaker front, drivers, and binding posts carefully to protect them from paint overspray.
Remove grille, apply several light coats of paint, avoiding heavy coats to prevent grille clogging.