Need help?Do you have a question about the Klipsch KD-51M and is the answer not in the manual?
General| Nominal Impedance | 8 Ohms |
|---|---|
| Crossover Frequency | 1800 Hz |
| Enclosure Material | MDF |
| Enclosure Type | Bass Reflex via rear-firing port |
| Inputs | Single Binding Posts |
| Sensitivity | 92 dB (in-room) |
| High Frequency Driver | 1" Aluminum LTS tweeter |
| Low Frequency Driver | 5.25" (13.34cm) Fiber-composite cone woofer |
Verify components against packing list and report any transit damage to the dealer or delivery service.
Place front left/right speakers 6-15 feet apart, potentially toed-in, with listener 1-1.5x distance.
Position center channel speakers as close to the video screen as possible for dialogue.
Mount surround speakers about 2 feet above listening position, typically 5-7 feet above floor.
Connect speaker wire to amplifier terminals matching polarity (RED to RED, BLACK to BLACK).
Do not remove metal strips on dual binding posts; connect wiring to the top set.
Klipsch speakers are 8-ohm compatible and efficient; ensure amplifier is suitable for high output.
Dust speakers occasionally. Use vacuum brush for grilles; avoid abrasive cleaners or detergents.
Register your product online at klipsch.com/register to receive updates and promotions.
To Next Page