Need help?Do you have a question about the Klipsch Reference Premiere RP-502S II and is the answer not in the manual?
General| Speaker Type | Surround |
|---|---|
| Power Handling (Continuous/Peak) | 100W/400W |
| Nominal Impedance | 8 Ohms Compatible |
| Crossover Frequency | 1500Hz |
| Enclosure Material | MDF |
| Enclosure Type | Sealed |
| Inputs | Single Binding Posts |
| Finish | Ebony, Walnut |
| Frequency Response | 58Hz - 25kHz |
| High Frequency Driver | 1" Titanium LTS Vented Tweeter with Hybrid Tractrix Horn |
| Low Frequency Driver | Dual 5.25" Cerametallic Woofers |
Optimal placement for stereo imaging, distance from listening position.
Placement for dialogue, proximity to screen.
Height and placement relative to listening position for ambiance.
How to connect speaker wire to terminals for basic setup.
Speaker impedance, efficiency, and amplifier compatibility advice.
Diagram showing optimal placement for Dolby Atmos speakers.
Visual guide for connecting Atmos elevation channels.
Instructions on how to clean the speakers without damage.
Information about registering the product online for updates.
To Next Page