Need help?Do you have a question about the Klipsch Reference Premiere RP-600M II and is the answer not in the manual?
General| Sensitivity | 96 dB |
|---|---|
| Power Handling (Continuous) | 100W |
| Power Handling (Peak) | 400W |
| Impedance | 8 Ohms |
| Woofer | 6.5" Cerametallic Cone Woofer |
| Enclosure Type | Bass-reflex via rear-firing port |
| Sensitivity @ 2.83V / 1m | 96 dB |
| Inputs | Single Binding Posts |
| Enclosure Material | MDF |
| Type | Bookshelf speaker |
| Tweeter | 1" LTS Titanium |
| Finish | Ebony, Walnut, Piano Black |
| Frequency Response | 45Hz - 25kHz |
Place speakers 6 to 15 feet apart for optimal performance. Consider slight toe-in for better stereo imaging.
Position center speakers near the screen to align dialogue and primary sounds with the video display.
Place surround speakers about 2 feet above listening position (5-7 feet above floor) on adjacent or rear walls.
Connect RED (+) terminal of speaker to RED (+) terminal of amplifier, and BLACK (-) to BLACK (-).
Klipsch speakers are highly efficient, 8-ohm compatible, and can be driven to high levels with low distortion.
To Next Page