Component Specifications
RB-5
Sensitivity: 96dB @ 1 watt / 1 meter
Bandwidth: 48Hz–20kHz±3dB
Nominal Impedance: 8 ohms
Crossover Frequency: 1950Hz
Power Handling: 150 watts maximum continuous
(400 watts peak)
Enclosure Type: Bass reflex via wide flare, rear-firing port
Drive Components: Two-way system using one 1" (2.54cm)
K-105-K titaninum dome, magnetically shielded compres-
sion driver with a 90° x 60° Tractrix Horn and one 8"
(20.32cm) K-1084-S aluminum cone, magnetically shielded
woofer
Net Weight: 23lbs. (10.5kg)
Height: 17" (43.2cm)
Width: 9" (22.9cm)
Depth: 12.6" (30.9cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Wood veneers
RF-3
Sensitivity: 98dB @ 1 watt / 1 meter
Bandwidth: 37Hz–20kHz±3dB
Nominal Impedance: 8 ohms
Crossover Frequency: 1975Hz
Power Handling: 225 watts maximum continuous
(600 watts peak)
Enclosure Type: Bass reflex via wide flare, rear-firing port
Drive Components: Two-way system using one 1" (2.54cm)
K-105-K titaninum dome, magnetically shielded compres-
sion driver with a 90° x 60° Tractrix Horn and two 8"
(20.32cm) K-1038-S aluminum cone, magnetically shielded
woofers
Net Weight: 56lbs. (25.5kg)
Height: 38.5" (97.8cm)
Width: 9" (22.9cm)
Depth: 16.2" (41.0cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Black Ash vinyl veneer
RP-3
Sensitivity: 95dB @ 1 watt / 1 meter
Bandwidth: 27Hz–20kHz±3dB
Nominal Impedance: 8 ohms
Crossover Frequencies: 2750Hz and 90Hz
Power Handling: 75 watts maximum continuous
(300 watts peak)
Enclosure Type, Tweeter and Mid Bass: Sealed
Enclosure Type, Subwoofer: Sealed
Drive Components: Three-way system using one 1" (2.54cm)
K-105-K titaninum dome, magnetically shielded compres-
sion driver with a 90° x 60° Tractrix Horn, one 6.5
(16.51cm) K-1081-S aluminum
cone, magnetically shielded
mid-bass and one 10"(25.4cm) K-1082-K subwoofer
Subwoofer Amplifier: Peak output power 440 watts into 4 ohms/
FTC-rated power: 105 watts continuous into 4 ohms, 22-
90Hz @ 1% THD maximum
Auto Power On: 2 second ON delay, 15 minute OFF delay
Inputs: High level speaker terminals via binding posts; two line
level terminals including a variable line input and a dedicated
LFE input (non-filtered) via RCA phono jacks
Outputs: One line level and one LFE output via RCA phono
jacks (pass through from Line In and LFE input)
Net Weight: 62lbs. (28.2kg)
Height: 40.5" (102.9cm)
Width: 9" (22.9cm)
Depth: 16.8" (42.7cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Black Ash vinyl veneer
Voltage: 110/120VAC 60Hz
Export version: 230VAC 50/60Hz
RP-5
Sensitivity: 96dB @ 1 watt / 1 meter
Bandwidth: 25Hz–20kHz±3dB
Nominal Impedance: 8 ohms
Crossover Frequencies: 1950Hz and 90Hz
Power Handling: 150 watts maximum continuous (400 watts peak)
Enclosure Type, Tweeter and Mid Bass: Sealed
Enclosure Type, Subwoofer: Bass reflex via wide flare,
rear-firing port
Drive Components: Three-way system using one 1" (2.54cm)
K-105-K magnetically shielded, titaninum dome compres-
sion driver with a 90° x 60° Tractrix Horn, one 8"
(20.32cm)
K-1084-S aluminum cone, magnetically shielded
mid bass and one 12" (30.38cm) K-1087-K subwoofer
Subwoofer Amplifier: Peak output power 525 watts into 4 ohms/
FTC-rated power: 165 watts continuous into 4 ohms,
22-80Hz @ 1% THD maximum
Auto Power On: 2 second ON delay, 15 minute OFF delay
Inputs: High level speaker terminals via binding posts; two line
level terminals including a variable line input and a dedicated
LFE input (non-filtered) via RCA phono jacks
Outputs: One line level and one LFE output via RCA phono
jacks (pass through from Line In and LFE input)
Net Weight: 72lbs. (32.7kg)
Height: 42.5" (107.9cm)
Width: 9" (22.9cm)
Depth: 20.3" (51.6cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Black Ash vinyl veneer
Voltage: 110/120VAC 60Hz
Export version: 230VAC 50/60Hz
RC-3
Sensitivity: 97dB @ 1 watt / 1 meter
Bandwidth: 60Hz–20kHz±3dB
Nominal Impedance: 8 ohms
Crossover Frequency: 1950Hz
Power Handling: 150 watts maximum continuous (400 watts peak)
Enclosure Type: Sealed
Drive Components: Two-way system using one 1" (2.54cm)
K-105-KV magnetically shielded titaninum dome compres-
sion driver with a 90° x 60° Tractrix Horn and two 6.5"
(16.5cm) K-1085-SV aluminum cone, magnetically shielded
woofers
Net Weight: 29lbs. (13.2kg)
Height: 7.9" (20.1cm)
Width: 22.9" (58.2cm)
Depth: 9" (22.8cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Black matte vinyl
RS-3
Sensitivity: 95dB @ 1 watt / 1 meter (equivalent sound energy)
Bandwidth: 49Hz–20kHz±3dB
Nominal Impedance: 8 ohms
Crossover Frequency: 2100Hz
Power Handling: 75 watts maximum continuous (300 watts peak)
Enclosure Type: Sealed
Drive Components: Two-way system using two 1" (2.54cm)
K-106-K neodymium magnet tianium dome compression
drivers with 90° x 60° Tractrix Horns and one 6.5"
(16.51cm)
K-1086-S aluminum cone woofer
Net Weight: 12lbs. (5.5kg)
Height: 8.5" (21.6cm)
Width: 18.7" (47.5cm)
Depth: 7.4" (18.8cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Black or White
CE
This product complies with the essential requirements of
EMC directives 89/336/EEC and 73/23/EEC (inclusive of
93/68/EEC) and carries the CE mark accordingly.
To Next Page
Loading...
