Klipsch RSB-8 - User Manual

!
!
Sound&Bar&Demo&Mode&Instructions&
!
The!new!Klipsch!sound!bars!come!with!specific!modes!for!retail!demonstration,!display!
demonstration,!and!custom!installer!mode,!in!addition!to!the!consumer!listening!mode!(which!
is!the!default!out!of!the!box!setting).!!!
!
The!retail,!display!and!installer!modes!have!been!designed!to!optimize!performance!in!their!
respective!environments!and!access!to!these!modes!is!not!covered!in!the!owner’s!manual!as!
they’re!not!for!consumer!use.!
!
Below!is!the!detail!on!the!settings!for!each:!
!
!
How&to&put&the&Klipsch&sound&bar&into&one&of&the&Demo&Modes:&
!
Step&1:!!Within&10&seconds&of&plugging&in&AC&power,&Press&and&hold&source&and&volume&up&
buttons&simultaneously&for&>5&seconds&to&engage&Demo&Select&mode.&&&
&
Step&2:
&
While&in&Demo&Select&Mode,&press&the&volume&+&button&to&cycle&through&the&Consumer,&
Display,&and&Retail&modes.&&Press&the&Volume&+&button&until&the&desired&mode&is&flashing.&The&
following&LEDs&on&the&front&panel&of&the&sound&bar&will&illuminate&to&indicate&which&mode&the&
sound&bar&is&in:&
&
• HDMI1&LED&will&fast&blink&at&4Hz&to&indicate&Consumer&Mode.!
• Analog&LED&will&fast&blink&at&4Hz&to&indicate&Display&Mode.!
• Digital&LED&will&fast&blink&at&4Hz&to&indicate&Retail&Mode.&!

Summary

Klipsch Sound Bar Demo Modes

Overview of Demo Modes

Explains the purpose of retail, display, and custom installer modes for Klipsch sound bars.

Sound Bar Demo Mode Settings

Details the configuration settings for Consumer, Retail, Display, and Installer modes.

Engaging Klipsch Sound Bar Demo Modes

Selecting a Demo Mode

Step 1: Press and hold source and volume up buttons to engage Demo Select mode within 10 seconds of plugging in.

Identifying Selected Demo Mode

Step 2: Use volume + to cycle through modes; LEDs indicate Consumer, Display, or Retail mode via blinking.

Installer Mode LED Indicator

HDMI2 or TV LED fast blink indicates Installer Mode for specific Klipsch sound bar models.

Confirming Demo Mode Selection

Step 3: Allow the selected LED to flash for 10 seconds to exit demo select mode and confirm selection.

Klipsch RSB-8 Specifications

General

Audio decoders	-
RMS rated power	100 W
Audio output channels	2.1 channels
Peak Music Power Output (PMPO)	150 W
Woofer diameter	63.5 mm
Number of woofer drivers	2
Full-range driver diameter	19 mm
Soundbar speaker RMS power	- W
Woofer diameter (imperial)	2.5 \
Signal-to-Noise Ratio (SNR)	103 dB
Subwoofer type	Active subwoofer
Subwoofer included	Yes
Cables included	AC, HDMI
Receiver included	No
Product color	Black, Silver
Recommended usage	TV
Apple docking compatibility	Not supported
HDMI in	1
Bluetooth version	2.0+EDR
Connectivity technology	Wired & Wireless
Digital audio coaxial in	0
AC input voltage	110 - 120 V

Weight and Dimensions

Depth	95.3 mm
Width	1016 mm
Soundbar weight	2950 g
Subwoofer depth	266.7 mm
Subwoofer width	187.4 mm
Subwoofer height	342.9 mm
Subwoofer weight	4350 g