KLIQ UBERTUNER - User Manual

UberTuner User‟s Manual Page 1
Dear Musician,
Thank you for purchasing the UberTuner, and welcome to the KLIQ! To register your product warranty, please visit
www.kliqmusicgear.com/warranty. To get the most out of your new tuner, please carefully read this manual prior to
first use, and keep it for later reference.
PRECAUTIONS
1. Using the tuner in the following locations can result in a malfunction:
• In direct sunlight
• Locations of extreme temperature or humidity
• Excessively dusty or dirty locations
• Locations of excessive vibration
• Close to magnetic fields
2. When not using the tuner for an extended period of time, please remove the battery to prevent it from
leaking.
3. To avoid breakage, do not apply excessive force to the buttons, battery cover, or display.
4. If the exterior becomes dirty, wipe it with a clean, dry cloth. Do not use any chemical liquid cleaners or
water.
5. To avoid damage to your instrument‟s finish, we recommend removing the tuner from your instrument when
not in use.
INSTALLING THE BATTERY
The tuner uses 1 CR2032 3V battery (included). To install the battery, slide out the battery tray from the tuner,
insert a new battery into the tray, and gently push the battery drawer tray back in until you feel a slight “click.” The
battery‟s positive side (+) should be facing up when placed inside the battery tray, as shown in the illustration below:
ATTACHING THE TUNER TO YOUR INSTRUMENT
When attaching the tuner to your instrument, please be careful as to not damage the instrument‟s finish. Do not
attach the tuner to your instrument if the rubber pads on the tuner clip are visibly worn or are missing. For guitars,
attach the tuner to the headstock with the display either in front of, or behind the headstock. For other instruments,
find a safe and visible location to attach the tuner to. Adjust the display by turning and tilting the „L‟ shaped arm
that connects the tuner to the clip. The display itself also rotates 360 degrees, which means you have many
adjustment options for optimal visibility of the tuner display.

Summary

Precautions

Battery Removal for Extended Storage

Remove battery when not using the tuner for extended periods to prevent leaks.

Avoid Excessive Force

Do not apply excessive force to buttons, battery cover, or display to prevent breakage.

Cleaning Instructions

Wipe exterior with a clean, dry cloth; avoid chemical cleaners or water.

Instrument Finish Protection

Remove tuner from instrument when not in use to protect instrument's finish.

Installing the Battery

Display & Button Functions

Operating Instructions

Turn tuner on/off by pressing and holding the POWER/KEY button for 2 seconds.

Tuning Modes

Change tuning modes by holding the MODE button; modes include Chromatic, Guitar, Bass, Violin, Ukulele.

A4 Reference Pitch Calibration

Set A4 calibration by pressing A4 button; adjusts reference pitch in 1 Hz steps from 430-450 Hz.

Transposition Settings

Select transposition settings for instruments by pressing KEY button.

Power Save Feature

Troubleshooting

Specifications

Note Name Indicator Values

Chromatic Mode Note Names

Lists note names for Chromatic Tuning Mode: C, Db, D, Eb, E, F, Gb, G, Ab, A, Bb, B.

Guitar Mode Note Names

Lists note names for Guitar Tuning Mode: 7B, 6E, 5A, 4D, 3G, 2B, 1E.

Bass Mode Note Names

Lists note names for Bass Tuning Mode: LB, 4E, 3A, 2D, 1G, HC.

Violin Mode Note Names

Lists note names for Violin Tuning Mode: 4G, 3D, 2A, 1E.

Ukulele Mode Note Names

Lists note names for Ukulele Tuning Mode: C Tuning (4G, 3C, 2E, 1A) and D Tuning (4A, 3D, 2F#, 1B).

KLIQ UBERTUNER Specifications

General

Type	Clip-on
Display	LCD
Tuning Range	A0 (27.5 Hz) - C8 (4186 Hz)
Tuning Modes	Chromatic, Guitar, Bass, Violin, Ukulele
Detection Method	Vibration
Accuracy	± 1 cent
Calibration	A4: 440Hz
Power	1 x CR2032 battery