What to do if the light cannot be completely switched off via the control panel in KLS Martin group Medical Equipment?
If the light on your KLS Martin group Medical Equipment cannot be completely switched off via the control panel, de-energize the light using the main switch.
What to do if the light does not come on in KLS Martin group Medical Equipment?
If the light on your KLS Martin group Medical Equipment does not come on, ensure that you put the sterilizable handle with the glass insert in place.
Explains CAUTION, WARNING, and DANGER symbols for hazard indication.
Specifies intended use, operational environment, and critical safety warnings.
Provides general safety guidelines for operating the lights.
Instructs on safe procedures for handling damaged or defective equipment.
Details pilot laser regulations, eye safety, and operational procedures.
Highlights risks associated with operating defective lighting units.
Warns about heat generation and explosion risks in specific environments.
Outlines checks and handling procedures before operating the lights.
Details risks of light failure, damage, and patient eye injury during operation.
Provides instructions for attaching the sterilizable handle before use.
Step-by-step guide for removing and installing the sterilizable handle.
Warns about electrical, infection, and explosion hazards during cleaning.
Instructions for machine disinfection and sterilization of handles, including life of handles.
Details risks and approved methods for machine disinfection of handles.
Describes the periodic safety checks to be performed by authorized personnel.
Provides a table for identifying and resolving common issues and error codes.
Outlines the necessary safety checks and their documentation requirements.
General| Brand | KLS Martin group |
|---|---|
| Model | marLED V16 |
| Category | Medical Equipment |
| Language | English |
To Next Page
