To Next PageTo Next PageWhy is my Klutch Water Filtration Systems leaking oil through the needle assembly (3)?
Oil leaking through the needle assembly (3) indicates that the O-ring (3.1.2) is damaged. You should replace the O-ring.
What to do if the knob of the drain valve does not return on my Klutch Water Filtration Systems?
If the knob of the drain valve does not return, it's likely that the valve components are stuck. Try pulling the knob and operating it. If the valve gets stuck again, replace the semi-auto drain valve assembly.
Why is my Klutch Water Filtration Systems leaking oil through the housing and needle assembly?
If oil is leaking through the housing and needle assembly, the O-ring (3.2) is likely damaged. Replace the O-ring to fix the leak.
Why is the flow of oil not adjustable in my Klutch Water Filtration Systems?
If the flow of oil is not adjustable, it's probably because the O-ring (5.3) is damaged. Replace the O-ring to resolve this.
Why is there an air leak at the gland plug (12.2.1) and bowl guard (12) interface on my Klutch Water Filtration Systems?
An air leak at the gland plug (12.2.1) and bowl guard (12) interface suggests that the O-ring (12.2.3) is damaged. Replace the O-ring.
Why are there air bubbles along with oil drops in my Klutch Water Filtration Systems?
If you notice air bubbles along with oil drops, it indicates that the O-ring (3.3) is damaged. Replace the O-ring to correct this.
General| Brand | Klutch |
|---|---|
| Model Number | 48577 |
| Filter Type | Sediment |
| Operating Temperature | 40 - 100° F |
| Inlet/Outlet Size | 1 inch NPT |
