To Next PageTo Next PageHow do I remove a tapered tool from my Klutch Industrial Equipment tailstock quill?
If you can't remove a tapered tool from the tailstock quill of your Klutch Industrial Equipment: * The quill had not retracted all the way back into the tailstock: Turn the quill handwheel until it forces taper out of quill. * Debris was not removed from taper before inserting into quill: Always make sure that taper surfaces are clean.
Why is my Klutch Industrial Equipment making a loud, repetitious noise?
A loud, repetitious noise from your Klutch Industrial Equipment may be due to: * Gears not aligned in headstock or no backlash: Adjust gears and establish backlash. * Broken gear or bad bearing: Replace broken gear or bearing. * Workpiece is hitting stationary object: Stop lathe immediately and correct interference problem.
Why is my Klutch Industrial Equipment tailstock quill not feeding out?
If the tailstock quill on your Klutch Industrial Equipment will not feed out of the tailstock: * Quill lock knob is tightened down: Turn knob counterclockwise.
General| Brand | Klutch |
|---|---|
| Model | 49656 |
| Category | Industrial Equipment |
| Language | English |
This compact 7" x 12" lathe is light-duty multi-purpose machine used for typical turning processes to economically produce small precision parts, threaded parts, fittings, and dies. The lathe features a low and high spindle speed, a change gear set, a wrench set and an oil can.
Detailed specifications including dimensions, capacity, motor, and weight.
Read and understand all instructions to prevent serious injury or property damage.
Ensuring a clean, dry, and well-lit work area free from hazards.
Staying alert, dressing properly, and using common sense while operating the tool.
Proper grounding and handling of electrical cords to prevent shock.
Warning about chemicals known to cause cancer or reproductive harm.
Guidelines for safe and effective use and maintenance of the lathe.
Key safety points for operating the lathe to prevent injury.
Ensuring proper grounding for electrical safety.
Guidelines for selecting and using appropriate extension cords.
Checking contents and preparing for assembly.
Instructions for securely mounting the lathe to a workbench.
Diagram identifying the primary components of the lathe.
Visual representation of the lathe's components.
Guidelines for setting up and performing simple turning operations.
Using the automatic feed for turning operations.
Procedure for cutting bevels using the compound slide.
Detailed procedure for performing screwcutting operations.
Cleaning and preparing the lathe after operation.
Instructions for safely storing the lathe.
Daily and monthly checks and lubrication requirements.
Procedure for inspecting and changing motor brushes.
Electrical wiring schematic for 220-240V/50Hz operation.
Electrical wiring schematic for 100-120V/60Hz operation.
Comprehensive list of all replaceable parts with reference numbers.
Diagnosing and resolving problems related to the motor and electrical system.
Addressing common issues with machine operation and work quality.
Information on ordering replacement parts for the lathe.
Details of the product's warranty coverage, limitations, and claims process.
Purchaser responsibilities, risk assumption, and legal jurisdiction.
