Step 2. Take out 2pcs long screws (F) and 2pcs curved washers (G), connect the handlebars
with upright tubes together. Secure them with screws and washers. Then put the cover (B) to
armrest. Before fasten screws, please make sure the cables in the upright tube is not pressed by
screws.
Step 3. Fix the control panel at a suitable angle with M6 knob (D). Fix M16 knob (C) to left upright
tube, then put the safety key (K) on the front of control panel.
WARNING! PLEASE PROVIDE A SAFETY
AREA OF AT LEAST 2.0M IN LENGTH
AND 1.0M IN WIDTH AND KEEP A
SAFETY DISTANCE OF 0.6M AROUND
THE EQUIPMENT DURING EXERCISING.
To Next Page
Loading...