To Next PageTo Next Page
Need help?Do you have a question about the KMB SMY 133 and is the answer not in the manual?
Details on the instrument's connection, measurement, power supply, and data handling.
Information on available SMY 133 configurations and compatible accessories.
Essential safety precautions for operating the SMY 133 instrument to prevent injury and electric shock.
Guidance on the physical installation of the SMY 133 meter into a distribution board panel.
Procedure for locking and unlocking the instrument to prevent unauthorized configuration changes.
On-screen configuration steps for basic instrument settings using the front panel buttons.
Steps for advanced instrument configuration using the ENVIS.Daq software on a PC.
Configuring object and record names for proper identification and categorization of archived data.
Steps for connecting to the instrument and downloading archived data to a PC using ENVIS.Daq.
Information on how the SMY 133 acts as an energy meter, registering active/reactive energy and tariffs.
Accessing instrument measurements and settings remotely via a web browser through the Ethernet interface.
Explanation of how RMS voltage and current values are evaluated from sampled data.
Formulas and methods for calculating active, reactive power, and power factor.
Evaluation of voltage and current harmonic distortion using FFT analysis up to the 63rd harmonic.
How aggregated data is stored in memory based on recording interval and memory capacity.
Details on instrument auxiliary power supply voltage and parameters for different models.
Specifications for measured voltage, current, frequency, unbalance, harmonics, and mains signalling voltage.
Technical details of digital outputs (relay, opto-MOS) and digital input.
Function characteristics for power quality according to IEC standards.
Voltage quality evaluation according to EN 50160 standard for specific firmware modules.
Classification of the power monitoring instrument according to IEC 61557-12 standard.
Information on the SMY 133's maintenance requirements and operational condition considerations.
Contact information and procedure for reporting failures or breakdowns for service.
Details on the warranty period, terms, and conditions for repairs and service.
General| Brand | KMB |
|---|---|
| Model | SMY 133 |
| Category | Measuring Instruments |
| Language | English |
