ASSEMBLY / USAGE
1. Open the main frame, turn the footrest downward, and then put the handrail tube (D) with brake level into main frame (A), align the hole, tighten with knobs
(E), washers (F) and screws (G). Like below images.
2. Secondly, put the side armrest (C) into main frame (A), align the hole and then use the knobs (E), washers (F) and screws (G) to tighten, like below image 4.
3. Finally, put the backrest tube (B) into main frame (A) push button until you hear “Click”.
HANDLE HEIGHT ADJUSTMENT
- The handles are height adjustable in increments from 32.5” to 37.4” from the floor. To set the correct handle height, stand upright with your arms by your side
and adjust the handle bar height to align with your wrists. If in doubt, please consult a healthcare professional.
- Unlock the knob on the handle height adjustment tube of the rollator and slide the handle height adjustment tube up or down to the desired height. - Ensure the
knob is tighten and both side are at the same height.
BREAK SYSTEM
The brake handles underneath the handles.
- To brake, pull the handle brake upwards toward the handle.
- To active the parking brake, push the handle brakedownwards till you hear a locking sound of the brake. The wheels will be blocked until you pull the parking
brakes upwards again.
KMINA ROLLATOR WHEELCHAIR - BLACK
KMINA ROLLATOR WHEELCHAIR - BLUE
KMINA ANDADOR CON SILLA - MANUAL DE USUARIO
KMINA DEAMBULATORE CON SEDUTA - MANUALE UTENTE
KMINA ROLLATOR MIT SITZ - BENUTZERHANDBUCH
KMINA DÉAMBULATEUR AVEC SIÈGE - MANUEL D'UTILISATION
E) Knobs
F) Washers
G) Screws
The KMINA ROLLATOR WHEELCHAIR is designed to provide support and assistance to those unable to, or who lack the confidence to, walk without some
level of support. This foldable aluminum walker rollator with wheelchair and storage bag is designed for indoor and outdoor use.
D) Handrail tube
with brake level
Tighten the handrail tube
with knob
Handrail tube
with brake level
Side armrest
To Next Page
Need help?
General
