4
1. Important notes 7
1.1 Preface to the operating instructions 7
1.2 Warnings and symbols in the operating instructions 7
1.3 Warning signs and what they mean 8
1.3.1 Warning and prohibitory signs on the grinding machine 8
1.3.2 General mandatory signs 8
1.4 Rating plate and serial number 9
1.5 Figure and position numbers in the Operating Instructions 10
2. Safety 11
2.1 Basic safety instructions 11
2.1.1 Observe notes in the operating instructions 11
2.1.2 Obligation on the part of the operator 11
2.1.3 Obligation on the part of the personnel 11
2.1.4 Hazards involved in handling the grinding machine 11
2.1.5 Malfunctions 12
2.2 Intended use 12
2.3 Warranty and liability 12
2.4 Safety regulations 13
2.4.1 Organizational measures 13
2.4.2 Protective equipment 13
2.4.3 Informal safety measures 13
2.4.4 Selection and qualification of personnel 13
2.4.5 Machine control system 14
2.4.6 Safety measures in normal operation 14
2.4.7 Hazards due to electrical power sources 14
2.4.8 Particular hazard zones 14
2.4.9 Servicing (maintenance, repair) and fault elimination 15
2.4.10 Structural modifications to the grinding machine 15
2.4.11 Cleaning the machine 15
2.4.12 Oils and greases 15
2.4.13 Relocation of the grinding machine 15
3. Description 17
3.1 Intended purpose 17
3.2 Technical specifications 17
3.3 Functional description 18
3.4 Description of components 19
3.4.1 Control panel 21
3.4.2 Switching the grinding machine on / off 21
3.4.3 Layout of user interface (main screen) 22
Table of Contents
To Next Page