Setup Continued & Maintenance:
Step 5: Brake Operation
To engage the brake, squeeze the brake lever on handle bar.
Your KneeRover
®
scooter comes equipped with a brake lock /
parking brake. Simply squeeze brake handle firmly and press the
button to engage the lock. To release the lock, squeeze the brake
handle again.
Ongoing Maintenance
With routine use, nuts and bolts on the steering column, tie rod
steering mechanism, and brake assembly can become loose. To
ensure safe continuous operation of this KneeRover
®
scooter, it is
important to periodically inspect the scooter for loose nuts and bolts
and re-tighten as appropriate.
KneeCycle Set Up Instructions:
Please follow the step by step instructions on the following pages to
properly assemble your KneeRover
®
scooter. The diagram below
identifies the key components of the scooter to aid with assembly.
To Next Page
Loading...
