EasyManua.ls Logo

KNEGT DF504G3 - Page 10

KNEGT DF504G3
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
504G3 SERIES TRACTOR OPERATION MANUAL
8
Knegt approved seat with seat belt.
14. When driving on public roads, be sure to respect traffic rules and regulations.
15. Do not rest your feet on the brake and the clutch pedals.
16. When driving on roads latch the brake pedals together by using the latch plate,
braking with the pedals unlatched may cause side skidding of the tractor. Try to
avoid overworking the brakes.
1.1.4Towinglo ads
1. To assure tractor stability while working, correctly adjust the towing attachments
(depending on the towed trailer or drawn implement).
2. Be careful when towing and stopping heavy loads.Stopping distance increase with
speed and weight of towed loads, and on slopes.Towed loads with or without
brakes that are too heavy for the tractors or are towed too fast can cause loss of
control.
3. For your personal safety, trailers should not be
towed unless equipped with an independent braking
system.
4. Always use drawbar and towing equipment to pull
heavy loads. Never hook or connect towed
equipment to the 3-point hitch lower links or to the
top link because pitching danger exists.
5. When towing never attempt to make a turn with a locked differential, because you
may not be able to steer the tractor.
1.1.5 Using Agricultural Implements and
Machines
1. Do not connect implements or machinery
requiring a higher power rating than your tractor
class.
2. Do not negotiate sharp turns with the PTO under heavy load; this will avoid
damaging the universal joints of the PTO (power take-off) propeller shaft.
3. When connecting the implement to the tractor never stand between the two, while

Table of Contents

Related product manuals