Need help?Do you have a question about the KNIPEX 00 50 01 T and is the answer not in the manual?
Provides guidance on using the operating instructions for KNIPEX Tethered Tools Lanyards and Adapter Straps.
Explains safety symbols and signal words used in the instructions to indicate hazard levels and the extent of hazards.
States that the operating instructions and associated documents are protected by copyright and remain KNIPEX property.
Outlines the manufacturer's statutory warranty terms, conditions, and exclusions for the tethering products.
Defines the specific purposes for which KNIPEX Tethered Tools Lanyards and Adapter Straps are designed, emphasizing tool tethering only.
Details critical safety warnings and precautions for using tethering tools to prevent injury or death, including hazard classifications.
Confirms products are tested and conform to ANSI ISEA 121-2018 and have undergone independent usability and loading capacity certification.
Illustrates and defines the components of the 1.5 kg capacity Lanyard and Adapter Strap using numbered diagrams.
Illustrates and defines the components of the 6 kg capacity Lanyard and Adapter Strap using numbered diagrams.
Explains the basic working principle of tethering tools with KNIPEX Lanyards and Adapter Straps, highlighting capacity limits.
Provides a table detailing product numbers, types, relaxed and stretched lengths, and load ratings for all tethering system components.
Shows diagrams illustrating which lanyards and adapter straps are compatible with different KNIPEX tools and tether points.
Details how to attach lanyards or adapter straps to tools, emphasizing compatibility checks and specific connection methods.
Provides step-by-step instructions for connecting the tool using the loop end of the lanyard, including cinching and cord stopper use.
Explains the procedure for connecting the tool using the carabiner end of the lanyard, including gate operation and clearance checks.
Instructs on how to secure the lanyard to safe anchor points, like structures or lifting devices, and advises against body anchoring.
Describes how to connect adapter straps to tools via loop and then to lanyards or anchor points via carabiner.
Offers general advice on safe tethering practices, including 100% tie-off, clearance calculations, and proper use of abridged connections.
Provides guidelines for storing the tool lanyards and adapter straps in a clean, dry location and cleaning them with mild soap and water.
States the manufacturer's limitations of liability for direct, indirect, or consequential damages arising from misuse of the tethering products.
To Next Page
General
