7
Installing the Batteries
When battery is low, the LED indicator will flash continuously.
1. Remove the battery cover.
2. Insert the batteries.
3. Close the battery cover.
Switching on/o
1. Slide OFF/ON to ON. The LED indicator will light up for a few second.
2. To switch the keyboard o, slide OFF/ON to OFF.
The keyboard will automatically enter sleep mode when it is idled for about
10 minutes. To wake it up press any key.
Please ensure the battery’s polarities(+/–) match the battery
compartment’s polarities.
The LED indicator will continue light up until the keyboard is
paired with your device.
CONNECTOFF ON
To Next Page
Loading...