6. Thread doorbell wires through wallplate, making sure to thread wires underneath plastic bridges of wallplate
leading to screw terminals, and secure to wallplate screw terminals.
Important: Minimize the length of excess wire leads protruding from the area surrounding the screw
terminals. Excess wire can interfere with the assembly to the ADC-VDB750 and may result in the device not
powering on.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Video_Doorbell_(ADC-VDB7…
Updated: Thu, 08 Jun 2023 16:11:26 GMT
5
To Next Page
Loading...