The peak level memory feature lets you check the highest
level of CO recorded by your alarm.
If the digital display reads “PEAK”, press the “Peak”
button once and your unit will display the peak level of
CO recorded since the last time it was reset.
While your unit is not currently in alarm it has previously
detected carbon monoxide - the peak level detected is
visible on the display. You may want to check for a
potential source of carbon monoxide. If your unit detects
a dangerous level of carbon monoxide – it will go into
alarm. Please follow those directions.
To clear the Peak level memory, press the “Peak” button
a second time.
If you plan to call someone to investigate a potential CO
problem, do not clear the peak level until the investigation
has been completed.
USING THE PEAK LEVEL MEMORY FEATURE
CHANGING THE LANGUAGE FROM ENGLISH
TO SPANISH
Your alarm can provide audio and visual notifications in
both English and Spanish. The default setting for the
alarm is English.
If you press the “Status” button twice, the notification
language will be changed to Spanish.
To return to English, repeat that process.
If you have questions that cannot be answered by
reading this manual, please contact our Customer Service
Team at 800-552-5669.
12
To Next Page
Loading...
Need help?
General