KDC180
Charging Cradle Mini Guide
Charging via Type-C Port (2-Slot)
Charging via DC Connector (10-Slot)
1 x KDC180 2-Slot Cradle with No-Boot Spacer
1 x KDC180 2-Slot Cradle with UHF Spacer (Optional)
1 x 5V/2.4A USB Adaptor
1 x USB TYPE-C Cable
What’s in the Box? 2-Slot Cradle
1 x KDC180 10-Slot Cradle with No-Boot Spacer
1 x KDC180 10-Slot Cradle with UHF Spacer (Optional)
1 x 12V/10A DC Power Adaptor
What’s in the Box? 10-Slot Cradle
12V/10A
ADAPTOR
With UHF Spacer
(Optional)
With No-Boot Spacer
With No Boot Spacer
With UHF Spacer (Optional)
* The shape of the adaptor may vary by country.
Connect the power adaptor to the DC jack on the back of
the 10-Slot Charging Cradle (B). Place the KDC180
into the charging cradle to begin charging.
Connect the USB adaptor and USB Type C cable. Then,
connect the USB Type C cable to the USB Type C port on
the back of the 2-Slot Charging Cradle (A). Place the KDC180
into the charging cradle to begin charging.
To Next Page
Need help?
General
