14
CARE AND MAINTENANCE
All maintenance should only be carried out by a qualied service technician.
WARNING
• Before cleaning or performing any maintenance, remove the battery from the tool. Never
disassemble the tool, battery pack or charger. For safe and proper operation, always keep
the tool and its ventilation slots clean.
WARNING
• To reduce the risk of personal injury and damage, never immerse your tool, battery pack or
charger in liquid or allow a liquid to ow inside them.
Cleaning
Always use only a soft, dry cloth to clean your vacuum; never use detergent or alcohol.
TROUBLESHOOTING
WARNING
• Turn the switch to the “OFF” position, and remove battery from the tool before performing
troubleshooting procedures.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Tool does not work. 1. Low battery capacity.
2. The battery pack or fan is too
hot.
3. The cylindrical end of the
power cord was not connected
to the receptacle securely.
1. Charge the battery pack.
2. Turn off the fan and allow the
fan and battery pack to cool.
3. Check and connect them
again securely.
WARRANTY
For 5 years from the date of purchase, the power tool is warranted for the original purchaser
to be free from defects in material and workmanship. This guarantee does not cover damage
due to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specic legal rights, and you may also have other rights
that vary from state to state.
Printed in China
To Next Page
Loading...
Need help?
General
