To Next PageTo Next PageWhy is my Kobalt Grinder motor overheating?
If the motor of your Kobalt Grinder is overheating, it's likely because the cooling vents are blocked. Make sure to clean and clear the vents. Also, avoid covering the vents with your hand while using the tool.
Why wheels cannot be installed on my Kobalt KAG 424B-03 Grinder?
If wheels cannot be installed on your Kobalt Grinder, it means the wheel is the wrong size. Refer to the specification chart for the correct wheel size.
General| Corded/Cordless | Corded |
|---|---|
| No Load Speed | 11000 RPM |
| Voltage | 120V |
| Maximum Speed (RPM) | 11000 |
| Arbor Size | 5/8 in |
| Disc Diameter | 4-1/2 in |
| Wheel Diameter | 4.5 |
| Spindle Thread | 5/8 in - 11 |
| Power Source | Electric |
| Wheel Arbor Size | 5/8 in |
Safety guidelines for eye protection, dust exposure, and hearing protection.
Understanding the tool and importance of professional servicing.
Explains tool symbols and provides general warnings for safe operation.
Guidelines for safe work area and precautions against electrical hazards.
Personal safety measures, proper attire, and safe handling of the power tool.
Advice on using the correct tool, maintenance, and accessory care.
Safety guidelines for battery usage and requirements for professional servicing.
Specific safety warnings for grinding and abrasive cutting-off operations.
Explains kickback and provides precautions to avoid it during operation.
Detailed safety advice for grinding and cutting operations, including wheel selection.
Familiarize yourself with tool features, safety requirements, and avoid modifications.
Instructions on how to attach and detach the battery pack from the tool.
Instructions on operating the paddle switch to turn the tool ON and OFF.
Guidance on using and cleaning the inlet-vent guard for tool performance.
Steps for installing and removing the auxiliary handle for better control.
Procedures for installing and adjusting the protective guard for safe operation.
Instructions on how to safely install and remove accessories like wheels.
Detailed steps for installing and removing grinding and cut-off wheels.
Guidance on the correct procedure for using the tool with grinding wheels.
Guidance on the correct procedure for using the tool with cut-off wheels.
Instructions for storing wheels and cleaning the tool and its parts.
