To Next PageTo Next PageWhy is my Kobalt KDG 124B-03 not working?
If your Kobalt Grinder isn't working, it could be due to a low battery. Try charging the battery pack. Alternatively, the battery might be overheating. If so, release the switch, allow the battery to cool down, and then try starting the tool again.
What to do if my Kobalt KDG 124B-03 motor is overheating?
If the motor of your Kobalt Grinder is overheating, the cooling vents might be obstructed. Make sure to clean and clear the vents. Also, avoid covering the vents with your hand while you're using the grinder.
General| Voltage | 120 |
|---|---|
| Corded/Cordless | Corded |
| Maximum Speed (RPM) | 11000 |
| Spindle Lock | Yes |
| No Load Speed | 11000 RPM |
| Wheel Diameter | 4.5 inches |
| Spindle Thread | 5/8-11 UNC |
| Wheel Arbor Size | 5/8 inch |
| Amperage | 6 Amps |
Covers work area, electrical safety, and general warnings for safe operation.
Details protective equipment, alertness, and proper conduct for user safety.
Covers battery care, service, and specific warnings for grinding operations.
Specific safety advice for grinding, including accessory selection and usage.
Explains kickback and provides precautions to avoid loss of control and injury.
Familiarize yourself with the tool's features and safety requirements before use.
Step-by-step guide for installing and removing the battery pack from the tool.
Instructions on how to turn the tool on/off and lock it for continuous operation.
Guide to adjusting the die grinder's speed for different applications.
Explanation of the LED worklight's illumination and blinking indicators.
How to attach, remove, and clean the inlet vent guard for tool performance.
Procedures for safely attaching and removing grinding accessories.
Guidance on proper technique, workpiece clamping, and safe operation of the tool.
Recommendations for storing accessories to maintain their condition and safety.
Steps for cleaning the tool and its components safely, emphasizing proper materials.
