11
kobalttools.com
OPERATING INSTRUCTIONS
• Always test a small area to avoid chance of damaging the
surface.
• The Turbo lance is designed for high impact cleaning. Only
use on hard surfaces such as driveways, cement surfaces,
patio bricks, etc.
Using High/Low Nozzle
• High pressure spray is used for cleaning and low pressure
spray activates the detergent function.
• The adjustable spray nozzle had has two (2) positions:
– IN position for high pressure spray. Twist the nozzle
clockwise until it stops and gap is closed.
– OUT position for low pressure spray for detergent function.
Twist the nozzle counterclockwise until it stops and gap is
open.
• When using the high pressure setting, twist the nozzle head
clockwise or counterclockwise to achieve the stream desired.
• When using the low pressure setting twist the nozzle head clockwise to open the fan blades
all the way.
IMPORTANT: When applying detergent using low pressure spray, the variable spray head must be set for the
“Pencil Stream”. This is when the metal blades in front of the nozzle are wide open so the detergent spray is
not constricted.
2
2
IN position
IN position
High Pressure Setting
Fan Spray Pencil Stream
1
2
OUT position
OUT position
LOW Pressure Setting
Pencil Stream