kobalttools.com
11
CLEARING A JAMMED FASTENER
Open nail head cover (part 24 shown on parts list of manual)
and remove 4 screws by turning counter clockwise.
(See Figure 6)
6
Remove the jammed fastener. The use of pliers
(not included) may be needed.(See Figure 7)
7
Get out the fastener
Remove the spacer (part 56 shown on parts list of manual)
un-tighten 2 screws by turning counter clockwise.
(See Figure 5)
5
To Next Page
Loading...
Need help?
General
