kobalttools.com
9
OPERATING INSTRUCTIONS
10. Using the mallet (K), strike the whack cap (A) of
angle. Repeat this process.(See Figure 10)
CLEARING A JAMMED FASTENER
CAUTION
NEVER point the tool
removed. During the process of clearing out any jammed fasteners,
instructions could result in serious injury and/or death.
10
A
K
Note: Consult your flooring manufacturer for
recommendation on proper spacing in between
fasteners.
Disconnect flooring nailer from air supply.(See Figure 1)
1
9.
foot plate to secure.(See Figure 9)
9
To Next Page
Loading...
Need help?
General
