3
PACKAGE CONTENTS
UNPACKING YOUR MITER SAW
WARNING:
To avoid injury from unexpected starting or electrical shock, do not plug the power cord
into a source of power during unpacking and assembly. The cord must remain unplugged whenever
you are adjusting/assembling the saw.
1. Remove the miter saw from the carton.
IMPORTANT: Do not lift miter saw by the trigger switch handle. It may cause misalignment. Lift the
saw by the hand holds for transportation.
2. Place the saw on a secure, stationary work surface.
3. Separate all parts from the packing material. Check each one with the illustration below to make
certain all items are accounted for before discarding any packing material.
WARNING:
If any part is missing or damaged, do not attempt to assemble the miter saw or plug
in the power cord until the missing or damaged part is correctly replaced. To avoid electric shock,
use only identical replacement parts when servicing double-insulated tools.
A
B
C
D
E
F
PART DESCRIPTION QUANTITY
A Miter saw 1
B Hold-down clamp 1
C Dust bag 1
D Blade wrench 1
E Miter handle 1
F AAA battery 2
To Next Page
Loading...
Need help?
General