28
Instructions manual | www.grupotemper.com
KMD 01
Digital multimeter
DC Current
Range Resolution Accuracy
660μA 0.1μA
±(1.0% of reading + 5 digits)
6600μA 1μA
66mA 10μA
660mA 100μA
10A 10mA ±(2.0% of reading + 2 digits)
Overload protection: μA and mA grade: FFuse FF600mA/1000V, A grade: Fuse
FF10A/1000V.
When measuring current is greater than 5A, the continuous measurement
time should not be more than 10 seconds. After measuring, disconnect the
current.
AC Current
Range Resolution Accuracy
660μA 0.1μA
±(1.5% of reading + 5 digits)
6600μA 1μA
66mA 10μA
660mA 100μA
10A 10mA ±(3.0% of reading + 5 digits)
Overload protection: μA and mA grade: FFuse FF600mA/1000V, A grade: Fuse
FF10A/1000V.
Frequency range: 50 ~ 60Hz
Response: true RMS
When measuring current is greater than 5A, the continuous measurement
time should not be more than 10 seconds. After measuring, disconnect the
current.
Operating Guidance
Reading Hold
• In the process of measurement, if reading hold is required, press “HOLD”
key, the value on the display will be locked.
• Press HOLD key again to cancel reading hold.
To Next Page
Loading...