koban KMD 01 - Maintenance and Warranty; Maintenance and Accessories

33
Instructions manual | www.grupotemper.com
KMD 01
Digital multimeter
immediately.
• Unscrew the fastening screw of the meter battery cover and remove it .
• Replace battery.
• Install the battery cover.
Note:
The battery polarity can’t be reversed.
Replace Probe
Warning
When replacing probe, replace with another identical probe or one with
the same capacity. The probe should be in good condition, with a capacity
of 1000V, 10A.
If the probe is damaged, such as having a bare metal wire, it should be
replaced immediately.
Accesories
Item Quantity
Probe 1
Manual 1
Battery 1
N
C
V