EasyManua.ls Logo

Koblenz KC-1500-S - User Manual

Koblenz KC-1500-S
11 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1/11 Elaborado: Septiembre / 2005
S
MAXIMA
CANISTER VACUUM CLEANER
MAXIMA
ASPIRADORA CANISTER
MODELOS:
KC-1500-S
KC-1300-A
KC-1300-R
KC-1250-V
KOBLENZ ELECTRICA S.A. DE C.V.
E-mail: servicio@koblenz-electric.com
Septiembre-05
LP-ACKC1500-200509
SERVICIO
SERVICE MANUAL
PART LIST
MANUAL DE SERVICIO
LISTA DE PARTES

Table of Contents

Questions and Answers

  • C
    Carl TurnerJul 31, 2025
    Why does my Koblenz Vacuum Cleaner have low suction?
    • M
      marysteinAug 1, 2025
      If your Koblenz Vacuum Cleaner has low suction, the issue might be a full bag. Empty the bag to restore suction. Alternatively, dirty filters could be the cause, so replace them. Check for any obstructions in the hose and clear them. A damaged cover seal or power electronic regulator can also lead to this problem, so replace them if necessary. In some cases, a damaged motor may be the reason for low suction, and it should be replaced.
  • D
    Dr. Amy MorenoAug 10, 2025
    What to do if my Koblenz Vacuum Cleaner does not start?
    • K
      Kathleen NelsonAug 10, 2025
      If your Koblenz Vacuum Cleaner does not start, first check if it is firmly plugged in. If the plug or cord is damaged, replace the cord. A damaged reel or on-off switch can also prevent the vacuum cleaner from starting, so replace them if needed. In some cases, a damaged motor may be the reason for not starting, and it should be replaced.
  • S
    Scott SmithAug 20, 2025
    How to fix a Koblenz Vacuum Cleaner cord reel that doesn't roll back?
    • B
      Barbara BernardAug 20, 2025
      If the cord reel of your Koblenz Vacuum Cleaner does not roll back, pull the cord 2 or 3 meters above and press the rewind button. The cause is that the cord is not correctly rolled.

Summary

OPERATING SYSTEM

REPLACEMENT PROCEDURES

TO REPLACE TOP BAGF FILTER

Procedure to replace the top bag filter by releasing the cover lock and removing the filter cover.

TO REPLACE THE REAR COVER

Steps for removing the rear cover, disconnecting components, and reassembling.

TO REPLACE THE POWER ELECTRONIC REGULATOR

Instructions for replacing the power electronic regulator, aligning the control arrow.

TO REPLACE ON-OFF SWITCH

Guidance on replacing the on-off switch by disconnecting terminals and releasing nails.

TO REPLACE THE MOTOR

Procedure for motor replacement, involving disconnection from the body base and reassembly.

TO REPLACE CORD REEL ASSY

Steps to replace the cord reel assembly by disconnecting it from the base body and reassembling.

TO REPLACE CABLE REWIND OR BUTTON SWITCH

Instructions for replacing the cable rewind button or switch, ensuring correct spring placement.

TO REPLACE FULL BAG INDICATOR

Process to replace the full bag indicator after releasing the cover lock and lifting the filter.

TROUBLE SHOOTING CHART

DOES NOT START

Troubleshooting common causes and solutions for the vacuum cleaner failing to power on.

LOW SUCTION

Addresses common causes of reduced suction and provides corresponding solutions.

CORD REEL DOES NOT ROLL BACK

Solutions for when the cord reel fails to retract properly, including manual intervention.

VACUUM CLEANER ASSEMBLY

PART LIST

ACCESORIES

ACCESORIES PARTS LIST

WIRING DIAGRAM

Koblenz KC-1500-S Specifications

General IconGeneral
BrandKoblenz
ModelKC-1500-S
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals