Other related products from Kockum Sonics.
More technical data about push buttons can be found in datasheet KSM 481.
More technical data about BELL and GONG can be found in datasheet KSM 354.
Please also visit us at our web site: www.kockumsonics.com
BELL and GONG
The BELL KB30 and GONG KG50
units with electromagnetic strikers.
Clear and well-sounding tones are
obtained by the choice of heavy
bronze for the BELL and GONG
pieces.
Other vital parts are of stainless
steel.
Page 16 of 20
TLG2000 Signal Controller Instruction Manual
MORSE LIGHT Key
TL - 70 for panel or box
mounting. Box mount-
ed size (including box):
height 124mm/130mm
Type Ref. no.
TL - 70 24500282
Box (IP66) 24500007
Push-button
Switch
TL - 80 or TL - 85 (with
lamp/LED) for panel or box
mounting. Box mounted
size (including box): height
107mm (fig. shows TL - 80)
Type Ref. no.
TL - 80 24500009
Box (IP66) 24500007
Lamp block 20570033
Lamp 230V 20560124
Lamp 115V 20560125
LED for 24V 20560127
“GEA” Switch
TL - 80GEA or TL - 85GEA (with
lamp/LED) for panel or box
mounting. Box mounted size
(including box): height 107mm
Type Ref. no.
TL - 80 GEA 2450 0101
Box (IP66) 24500007
Lamp block 20570033
Lamp 230V 20560124
Lamp 115V 20560125
LED for 24V 20560127
“Abandon Ship”
Switch
TL - 80AS or TL - 85AS (with
lamp/LED) for panel or box
mounting. Box mounted size
(including box): height 107mm
Type Ref. no.
TL - 80 AS 24500100
Box (IP66) 24500007
Lamp block 20570033
Lamp 230V 20560124
Lamp 115V 20560125
LED for 24V 20560127
AC-DC converter for
supplying TLG2000
Universal AC input range from
85 ~ 264V AC 50/60 Hz.
Easily mounted on DIN rail type
TS-35/7.5 or 15.
Dimensions:
22.5 x 90 x 100 mm (WxHxD)
Weight: 0.19 kg
Type Ref. no.
MDR-20-24 20142028
Extra protective box for
TLG2000
If extra protection is needed of the
unit’s rearside or the possibility to
mount the unit on the wall.
Includes cable penetrations.
Dimensions:
196 x 140 x 104 mm (WxHxD)
Weight: 1.1 kg
Type Ref. no.
Enclosure 21775055
To Next Page
Loading...
Need help?
General
