NOTE
Do not use 10x15 (4x6”) or 15x20 (6x8”) size paper (having width of 152 mm) after starting the use of 9x13 (3x5”) or 13x18
(5x7”) size paper (having width of 127 mm) .
If doing so, some lines may appear at the width of 127mm of 9x13 (3x5”) or 13x18 (5x7”) size paper. In this case, the
thermal head replacement is required.
Take the unit out of the box by the following procedures and illustrations. Make sure the contents of the accessory
are all included.
UNPACKING
PAPER / INK RIBBON SET
When using this unit, make sure to use the following types of the paper / ink ribbon set. Remove the spacers from the paper
anges when using other than CK-D735 and CK-D757.
Product name Print size Number of prints
CK-D735 9x13 (3.5x5”) 450
CK-D746 10x15 (4x6”) 400
CK-D757 13x18 (5x7”) 230
CK-D768 15x20 (6x8”) 200 (soon-to-be-available)
CONTENTS
The accessories items are placed in the top cushion. Check all items are included.
Paper anges Spacers Ink cassette
Operation
manual
Paper strip bin
Detailed
manual
Make sure to remove the protective materials from the ink cassette and paper anges.
Open the printer box from the top and remove the top
cushion containing the accessories out of the box.
Remove the protective cardboard and then take the accessories out of the
cushion.
Carefully pull the printer up and out of the box.
Pull the printer straight up as shown in the gure.
NOTE
Printer weighs about 12 kg. Handle with care.
Unwrap the packing.
Remove the protective materials for transportation such as protective sheet.
Remove the paper strip bin before carrying the printer.
Hold the printer by the front and rear handle as illustrated in the drawing.
CAUTION
• Do not carry the printer with the paper strip bin attached and by holding
the part under the paper strip bin. The paper strip bin may be removed
and fall. It may cause injury or damage.
• When the printing unit is not closed rmly or you press the OPEN button
accidentally, the printing unit may open. It can cause injury or damage.
Paper tray
Protective cardboard
Accessories