20
Using the Rewind Button
If you don’t want to take pictures on the entire film cassette, you
can automatically rewind the film by pressing the rewind button (12).
Once you’ve used this feature, you cannot reload the same film
cassette into the camera.
UNLOADING THE FILM
After you take the last picture on the film cassette, the film automatically
starts to rewind. When the film is fully rewound, the LCD panel (10)
displays “0” and an empty film cassette symbol (c). When you remove
the film from the camera, the LCD panel displays “E,” (a).
To Next Page
Loading...
