Kodak CHERISH C120 - Page 12

IntroductionPage | 22
WELCOME
1. The 2.8” Parent Unit and the 5” Parent Unit support
additional cameras (i.e the C120/C125). You can
add up to 4 additional cameras on the parent unit,
but up to 10 addditional cameras to the KODAK
Smart Home app.
2. To re-register your Baby Unit, or register a new
Baby Unit, follow the procedure below:
a. Press “ ” on the Parent Unit for the menu bar.
b. Press “ ” or “ ” button to select , then
“ ” to proceed to the next step.
c. Press “ ” to add camera, then “ ” to
proceed.
d. Press the “ ” button or “ ” button to select
the available camera number. Press “ ” to
add a camera unit.
2.3 Registration (Pairing)
NOTE: If a particular Baby Unit was registered previously,
registering this current Baby Unit again will overwrite the
old registration.
e. When the camera pairing icon “ ” appears;
press and hold the pair button on the baby unit
until you hear the beep, then release the pair
button.
f. The Parent Unit will then ind the camera
and complete the pairing and stream the live
video.
Getting Started