Kodak CHERISH C120 - 2 Getting Started

Page | 20 Getting Started
2. GETTING STARTED
1. Insert the small end (USB) of the Baby Unit’s power
adapter (Output 5V, 1500mA) into the USB socket
at the back of the Baby Unit. The C120 Baby Unit
should be charged for 6 hours and the C125 Baby
Unit should be charged for 8 hours.
2. Insert the other end of the power adapter into a
suitable electrical outlet.
3. Slide the ON/OFF switch to the ON position to
switch on the camera. The power indicator lights
up in blue.
4. Slide the ON/OFF switch to the OFF position to
switch o the Baby Unit. The power indicator
lights up in red, indicating that the camera is being
charged.
*IMPORTANT: Only use the supplied power
adapter.*
Baby Unit Power Supply