Kodak EASYSHARE D1025 - Attaching the D1025 stand and faceplate

Getting started
www.kodak.com/go/support
2
Attaching the D1025 stand and faceplate
1
2
4
Faceplate and stand
included in package.
3
Fit the stand into the slot
and slide to lock.
To adjust the display
angle, move the stand to
a different slot.
1
2
4
Faceplate and stand
included in package.
3
Fit the stand into the slot
and slide to lock.
To adjust the display
angle, move the stand to
a different slot.