Kodak EASYSHARE M5350

48 www.kodak.com/go/support
Troubleshooting
Getting help on the Web
Picture is too dark ■ Reposition the camera for more available light.
■ Use Fill flash (see page 14) in Program mode, change your position
so light is not behind the subject, or use the Backlight SCN mode.
■ Move so that the distance between you and the subject is within the
effective flash range. (See Specifications starting on page 49.)
■ To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■ In Program mode, increase the Exposure Compensation (see
page 17).
Picture is too light ■ Reposition the camera to reduce the amount of available light.
■ Turn the flash off (see page 14).
■ Move so that the distance between you and the subject is within the
effective flash range. (See Specifications starting on page 49.)
■ To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■ In Program mode, decrease the Exposure Compensation (see
page 17).
Get support for your product (FAQs, troubleshooting
information, etc.)
www.kodak.com/go/support
Purchase camera accessories www.kodak.com/go/accessories
Download the latest camera firmware and software www.kodak.com/go/M5350downloads
Register your camera www.kodak.com/go/register
Chat, email, write, or phone Kodak
(Chat not available in all languages)
www.kodak.com/go/contact
Status Solution