Doing more with your camera
12 www.kodak.com/go/easysharecenter
Using the self-timer
1 Choose the desired self-timer mode, then compose the scene.
2 Press the Shutter button halfway, then completely down.
The camera takes the picture/pictures after the delay.
Use the same procedure to take a video, but slide the mode switch to Video and
press the Shutter button completely down.
NOTE: Only the 2- and 10-second options are available in video mode. The video stops when no storage
space remains.
In this mode A picture is taken after...
A 10-second delay (so you have time to get into the scene).
A 2-second delay (for a steady, auto-shutter release on a tripod).
A 10-second delay. A second picture is taken 8 seconds later.
10
2
2x
Press
appears in the LCD status area.
until the desired self-timer icon
urg_00773.book Page 12 Tuesday, August 21, 2007 9:00 AM
To Next Page
Loading...
