Doing more with your frame
18 www.kodak.com/go/easysharecenter
Maintaining your frame and mattes
IMPORTANT:
Always disconnect the power before cleaning. Do not use water, cleaning
solutions, or other adhesives on the frame or any of its parts.
Gently wipe the frame, LCD, or matte with a clean, dry cloth (included). For
fingerprints on the frame, apply light pressure.
Resetting factory defaults
1 Make sure the power cable is connected and the
frame is turned on.
2 Insert a small sharp object into the reset button slot
and press the recessed reset button.
When the reset is successful, the set language screen
appears.
All settings return to the original factory defaults.
3 Reset your language. See page 3.
Reset button
slot
To Next Page
Loading...
