Getting started
www.kodak.com/go/digitalframesupport 7
Turning off your frame
■ Standby mode—Press the power button on the
frame.
■ Power off—Unplug the power cable.
Changing your frame orientation
Your frame is set up to display pictures in landscape orientation. You can turn the
stand to change it to portrait but you must also change the setting.
Change the stand position:
1 R
emove the stand, turn it 90
°
, and replace as shown
(see
page 2).
Change the setting:
1 Tap (Home)
→ (Settings).
2 Slide to highlight (Viewing options), then tap
OK.
Slide to highlight Frame orientation, then tap OK.
Slide to highlight Portrait, then tap OK.
3 Tap to exit.
To Next Page
Loading...
