Taking pictures/videos
www.kodak.com/go/support
13
Using the self-timer and burst
Use the self-timer when you want to be included in a picture or to ensure a steady
Shutter button press. For best results, place the camera on a tripod or steady surface.
You can turn on the self-timer using a shortcut (see page 12) or these steps:
1 Press the Menu button. Press to choose Self-timer, then press OK.
2 Press to choose a Self-timer setting:
Off—Self-timer is turned off.
10 Seconds— A picture is taken after a 10-second delay (so you have time
to get into the scene).
2 Seconds— A picture is taken after a 2-second delay.
2 Picture Timer— The first picture is taken after a 10-second delay. A
second picture is taken 8 seconds later.
Burst On—Take several pictures in succession
3 Compose the scene. Press the Shutter button all the way down.
The camera takes the picture/pictures after the delay.
To take a video after a 2- or 10-second delay, use the same procedure.
To Next Page
Loading...
