NOTE: EasyShare software also lets you change a color picture to black-and-white or sepia.
Sharpness
Control
picture
sharpness.
High
Normal (default)
Low
Exposure
Metering
Evaluate light
levels at
specific areas
of a scene.
Multi-Pattern (default) - evaluates lighting conditions throughout the image to give an optimum
picture exposure. Ideal for general picture taking.
Center-Weight - evaluates the lighting conditions of the subject centered in the lens. Ideal for
backlit subjects.
Center-Spot - similar to Center-weight, except the metering is concentrated on a smaller area of
the subject centered in the lens. Ideal when you need an exact exposure of a specific area in the
picture.
AF Control
Choose an
auto-focus
setting.
Continuous AF (default for video) - because the camera is always focusing, there is no need to
press the Shutter button halfway down to focus.
Single AF (default for pictures) - uses TTL-AF when the Shutter button is pressed halfway down.
NOTE: For the best pictures, the camera is set to Multi-zone when in Landscape mode.
Focus Zone
Select a large
or
concentrated
area of focus.
Multi-Zone (default) - evaluates 5 zones to give an even picture focus. Ideal for general picture
taking.
Center-Zone - evaluates the small area centered in the lens. Ideal when you need precise focus.
http://www.kodak.com/global/en/service/publications/urg00665toc.jhtml?chapsec=urg00665c4s1&pq-path=10/3905/7168/10510/10540 (4 of 7)19/01/2007 16:33:14
To Next Page
Loading...
Need help?
General
