15
Using the Self-Timer
1. Use a tripod (TRIPOD
SOCKET
20
) or place the
camera on another firm
support.
2. Slide the LENS COVER
8
completely open to uncover the
LENS
9
and to turn the
FLASH
5
on.
3. Slide the
SELF-TIMER
SWITCH
10
into latched
position.
4. Press the SHUTTER
BUTTON
1
to start the timer.
The self-timer will run for
approximately 8 seconds
before the picture is taken. The
self-timer switch will return to
the off position when finished.
NOTE: To cancel the self-timer
selection before the picture is
taken, close the lens cover or
press the shutter button until the
timer stops.
To Next Page
Loading...
Need help?
General
