20 www.kodak.com/go/easysharecenter
3 Solving camera problems
Camera problems
Status Solution
Camera does not
turn on
■ Make sure the battery is charged and installed correctly (see
page 1).
■ Turn the camera off, then on again.
Camera does not turn
off
Camera buttons and
controls do not function
Flash does not fire ■ Check the flash setting, and change as needed (see page 13).
NOTE: The flash does not fire in all modes.
In Review, a blue or
black screen is
displayed instead of
a picture
■ Transfer
all
pictures to the computer (see page 6).
■ Take another picture.
Memory card is almost
or entirely full
■ Transfer the pictures to the computer (see page 6).
■ Delete pictures from the card or insert a new card.
Pictures remaining
number does not
decrease after taking a
picture
■ Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
urg_00847.book Page 20 Friday, January 11, 2008 10:08 AM
To Next Page
Loading...
