Why Kodak EasyShare M1033 Digital Camera battery drains so fast?
If your Kodak Digital Camera's battery life is short, make sure the correct battery type is installed. Wipe the contacts with a clean, dry cloth before inserting a battery in the camera. You can also insert a new or charged battery.
Why Kodak EasyShare M1033 Digital Camera says memory card error?
If your memory card is not recognized or your Kodak Digital Camera freezes with the card, the card may be corrupted. Try formatting the card in the camera. You can also try using another memory card, ensuring that it is an SD or SDHC card, as these are the only supported types.
How to fix blurry pictures on Kodak EasyShare M1033 Digital Camera?
To automatically set exposure and focus with your Kodak Digital Camera, press the Shutter button halfway. When the framing marks turn green, press the Shutter button completely down to take the picture. You may also need to clean the lens or ensure that the camera is not in Macro mode if you are more than 27.6 in. (70 cm) from your subject. Placing the camera on a flat, steady surface or using a tripod, especially in high-zoom settings or in low light, can also help.
Why are my photos too dark on Kodak Digital Camera?
If your Kodak Digital Camera is producing pictures that are too dark, try repositioning the camera for more available light. You can also use Fill flash or change your position so light is not behind the subject. Ensure the distance between you and the subject is within the effective flash range. To automatically set exposure and focus, press the Shutter button halfway. When the framing marks turn green, press the Shutter button completely down to take the picture.
Why picture is too light with Kodak Digital Camera?
If your Kodak Digital Camera is taking pictures that are too light, try repositioning the camera to reduce the amount of available light. You can also turn the flash off and make sure that you are within the effective flash range. To automatically set exposure and focus, press the Shutter button halfway. When the framing marks turn green, press the Shutter button completely down to take the picture. In Smart Capture modes, adjust the Exposure Compensation.
What to do if Kodak EasyShare M1033 Digital Camera won't take pictures?
There are several reasons why you cannot take a picture with your Kodak Digital Camera. You can try turning the camera off and then on again. Ensure that you depress the Shutter button all the way. Also, make sure that you have inserted a new or charged battery. If the memory is full, transfer pictures to the computer, delete pictures, or insert another card.
What to do if Kodak EasyShare M1033 Digital Camera shows error message?
If your Kodak Digital Camera displays an error message on the LCD, try turning the camera off and then on again. You can also remove the memory card, turn off the camera, remove the battery, and wipe the contacts with a clean, dry cloth. Inserting a new or charged battery may also resolve the issue.
Why computer does not recognize Kodak EasyShare M1033?
There are several things you can try if your computer does not communicate with your Kodak Digital Camera. First, ensure that the battery is charged and installed correctly. Then, turn on the camera. Make sure the USB cable model U-8 is connected to the camera and the computer. If you are using an EasyShare dock, check all cable connections and make sure the camera is seated on the dock. Finally, ensure that EasyShare software is installed.
Why Kodak Digital Camera slide show not working on TV?
If your slide show does not run on an external video device with your Kodak Digital Camera, adjust the camera Video Out setting to NTSC or PAL. Also, ensure that the external device settings are correct.
What to do if Direct print menu interface turns off on Kodak Digital Camera?
If the Direct print menu interface turns off on your Kodak Digital Camera, press any camera button to redisplay the menu.
General| Megapixel | 10.1 MP |
|---|---|
| Camera type | Compact camera |
| Sensor type | CCD |
| Image stabilizer | Yes |
| Image sensor size | 1/2.3 \ |
| Maximum image resolution | 3648 x 2736 pixels |
| Digital zoom | 5 x |
| Optical zoom | 3 x |
| Interface | USB 2.0 |
| Digital SLR | No |
| Dimensions (WxDxH) | 93.7 x 20.7 x 57.8 mm |
| Camera shutter speed | 8 - 1/1448 s |
| Focal length (35mm film equivalent) | 35 - 105 mm |
| Focus adjustment | Auto |
| Normal focusing range | 0.6 - ∞ m |
| Macro focusing range (tele) | 0.07 - 0.7 m |
| Macro focusing range (wide) | 0.4 - 0.7 m |
| Light metering | Centre-weighted, Spot |
| ISO sensitivity | 64, 100, 200, 400, 800, 1600, 3200, 6400 |
| Flash modes | auto, fill-in, Flash off, Pre-flash, Red-eye reduction |
| Flash range (tele) | 0.6 - 2.3 m |
| Flash range (wide) | 0.6 - 4.2 m |
| Internal memory | 32 MB |
| Compatible memory cards | sd, sdhc |
| Motion JPEG frame rate | 30 fps |
| Video formats supported | QuickTime |
| Maximum video resolution | 640 x 480 pixels |
| Display diagonal | 3 \ |
| Display resolution (numeric) | 230000 pixels |
| Product color | Silver |
| Battery type | KLIC-7004 |
| Scene modes | Backlight, beach, Candlelight, Children, Close-up (macro), Documents, Fireworks, Museum, Night landscape, Night portrait, Panorama, Portrait, self-portrait, Sports, Sunset, Landscape (scenery) |
| Photo effects | black&white, Neutral, Sepia |
| White balance | auto, daylight, Fluorescent, Shade, Tungsten |
| Camera playback | Slide show |
Weight and Dimensions| Depth | 20.7 mm |
|---|---|
| Width | 93.7 mm |
| Height | 57.8 mm |
| Weight | 126 g |
Learn how to attach the camera strap for secure handling and carrying.
Instructions for inserting the Kodak KLIC-7004 rechargeable battery.
Steps for charging the camera battery using the provided cable or accessories.
Step-by-step instructions for composing and capturing still images.
Understand and select different flash modes (Auto, Fill, Red Eye, Off).
Instructions on how to record videos with sound using the camera.
Browse, zoom, and navigate through captured pictures in review mode.
Delete unwanted pictures/videos and learn about the undo delete feature.
Enhance picture brightness and detail automatically with Kodak's Perfect Touch.
Navigate the menu system to adjust capture, video, and setup options.
Adjust white balance for lighting conditions and enable face detection for focus.
Guide to installing the Kodak EasyShare software for photo management.
Connect the camera to a computer using a USB cable to transfer files.
Troubleshoot issues like camera not turning on, controls not working, or flash not firing.
Resolve issues with battery life, memory card recognition, and error messages on LCD.
Address problems with computer communication, picture transfer, and video output.
Find contact information, FAQs, and troubleshooting guides for your camera.
Key technical details including sensor, lens, zoom, shutter speed, and LCD information.
Information on replacing the battery and tips to extend battery life.
To Next Page