Doing more with your camera
www.kodak.com/go/support
29
Using the capture + tab
AF Control
Choose an auto-focus setting.
Continuous AF—because the camera is always focusing,
there is no need to press the Shutter button halfway down to
focus.
Single AF—uses TTL-AF (through-the-lens auto focus) when
the Shutter button is pressed halfway down.
Press Menu, , ,
and OK to access settings
Capture + Options
White Balance
Choose your lighting
condition.
Available in Smart Capture
mode.
Auto—automatically corrects white balance. Ideal for general
picture taking.
Daylight—for pictures in natural lighting.
Tungsten—corrects the orange cast of household light bulbs.
Ideal for indoor pictures under tungsten or halogen lighting
without flash.
Fluorescent—corrects the green cast of fluorescent lighting.
Ideal for indoor pictures under fluorescent lighting without
flash.
Open Shade—for pictures in shade in natural lighting.
Face Detection
Choose if faces get focus
priority.
On—In P mode (and in SCN modes designed for pictures of
people), the camera attempts to focus on faces.
Off
NOTE: Not available in Smart Capture mode because face detection is
always on.
Red Eye Preflash
Choose whether a preflash
fires when the flash is in Red
Eye mode.
On—red eye flash fires before the picture is taken.
Off—red eye flash does not fire.
NOTE: The camera automatically corrects red eye, even if the Red Eye
is set to Off.
Press Menu, , ,
and OK to access settings
Capture Options
To Next Page
Loading...
Need help?
General
Weight and Dimensions
