Taking pictures/videos
www.kodak.com/go/support
11
Using the self-timer
Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press. Place the camera on a tripod or flat surface.
1 In any Still mode, press until the desired
self-timer icon appears for:
10 seconds—A picture is taken after a 10-second
delay (so you have time to get into the scene).
2 seconds—A picture is taken after a 2-second
delay (for a steady, shutter release on a tripod).
2 shot—The first picture is taken after a 10-second
delay. A second picture is taken 8 seconds later.
2 Compose the scene. Press the Shutter button
halfway, then completely down.
The camera takes the picture/pictures after the delay.
NOTE: In Panoramic modes (page 34), only the 2- and 10-second options are available.
Use the same procedure to take a 2- or 10-second self-timer video, but press the
Shutter button completely down.
Using burst
Use burst to take up to 3 pictures in quick succession. (Burst is not available in
Panorama mode.)
1 In any picture-taking mode, repeatedly press
until the Burst icon appears at the top of the LCD.
2 Press the Shutter button halfway to focus and set
exposure. Press the Shutter button completely
down and hold it to take pictures.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
